1·The article studies the mechanical properties of PTT staple fibers.
研究了PTT短纤维的力学性能。
2·The summary of measured values of synthetic staple fibers needling nonwoven geotextiles is presented in this paper.
对短纤针刺非织造土工布的测试值进行归纳总结，并与国标值对照，提出几个问题进行讨论。
3·Some of these chemical polyester additives and modifications for staple fibers and filaments will be explained below.
本文介绍了一些聚酯短纤维和长丝的添加剂和改性剂。
4·The mechanism of the drop of the mechanical properties of the preoxided acrylic staple fibers under the attack ofthe aqueous…
探讨了预氧化腈纶短纤维在酸碱水溶液作用下，力学性能下降的机理及纤维预氧化程度对耐酸碱性的影响。
5·A new testing method of vacuum-pumping for bulkiness property of three-dimensional crimp polyester staple fibers was introduced.
介绍了一种新的测试三维卷曲涤纶短纤维的膨松性能的方法——抽真空法。
6·It has been long established that the crimp geometry and crimp properties of synthetic staple fibers decay with the ensuring stages of processing.
长期以来大家一致承认，合成纤维的卷曲形状和性能随着加工阶段的增加而减少。
7·One of the most common types of core - spun yarns is that involving a core of a stretch filament such as spandex with a covering of staple fibers.
最常用的包芯纱之一是芯部采用弹力丝(例如氨纶)，表层使用短纤维。
8·The process comprises the steps of providing a fibrous sheet containing a high density of relatively short staple fibers having a decitex under 6.6;
该方法包括如下步骤：提 供含纤维的板，其含有分特数低于6.6的高密度的相对较短的人造短纤维；
9·However, being high tenacity but low elongation, the stainless steel staple fibers are damaged seriously and have as low as a 70% finished product rate.
虽然金属纤维强力较高，但因为其伸长太小，所以制成率较低，只有70%，金属纤维损伤也较严重。
10·Therefore synthetic staple fibers in a large variety of types will also be required to achieve optimum and optimized nonwovens properties in the future.
因此，种类繁多的合成短纤将被不断需求以获得最佳的非织造布性能。